inContact WFO Administration > Configuration and Settings > Services > Web Media Server Settings Reference
Settings Details: Web Media Server
Overview
The Edit Web Media Server screen allows you to configure many Web Media Server settings in the inContact WFO Web Portal.
This
For more information, see inContact Workforce Optimization Services Overview.
Web Media Server Web Portal Settings
- Host
- Specifies the IP address of the Web Media Server. The default value is 127.0.0.1.
- Silverlight Port
- Specifies the port used to play recordings and stream live audio from the inContact WFO Web Portal. The default value is 4510.
- Media Port
- Specifies the port used for messaging traffic with CTI Core and Screen Recording Server. The default value is 5630.
- HTTP Port
- Specifies the port used for messaging traffic with Live Info Broker. The default value is 2015.
- Allow Live Monitor
- Specifies whether this Web Media Server can be used for live monitoring. The default value is selected.
- Excessive Debugging
- Specifies whether the log entries should be written at the highest level of detail for this Web Media Server. Enable this setting only
- API Host
- Specifies the IP address of the API Server, which is used only for exporting recordings via email. The default value is 127.0.0.1.
- API Port
- Specifies the port used to communicate with the API Server. The default value is 5620.
- API Reconnect Milliseconds
- Specifies the frequency at which the Web Media Server attempts to connect to the API Server via TCP. The default value is 5000 (5 seconds).
- API Connect Timeout Milliseconds
- Specifies the length of time before an attempted connection to the API Server times out. When the timeout expires, inContact WFO "sleeps" until the next connection attempt. The default value is 5000 (5 seconds).
- API Response Timeout Milliseconds
- Specifies the length of time Web Media Server will wait for a response from the API Server before it considers the connection to have timed out. The default value is 10000 (10 seconds).
- SSL Certificate Name
- Specifies the SSL certificate file name if SSL is required for data in transit.
- SSL Certificate Pass
- Specifies the SSL certificate password if SSL is required for data in transit.
- Location
- Specifies the location with which this Web Media Server is associated. This setting accepts values from a drop-down list of valid inContact WFO locations. The default value is Default
- Mapped Drives
- Allows you to configure an internal drive map. For example, if the filename says f:\recordings, but for Web Media Server the path is Z:\recordings, the f: becomes Z: on the Web Media Server side. Unless otherwise specified, default settings are used.