Customer Administration Tasks

During ongoing use of the system, your Uptivity administrator may need to configure new channels or reconfigure existing channels. At those times, this integration requires changes to the Voice Boards page.

The number of voice board channels corresponds to the number of channels configured on the physical Ai-Logix card. Adding channels may require purchase and installation of server hardware and Uptivity licensing. Contact Uptivity Support for additional information.

For more information on voice board tasks, search online help for voice boards.

Channel Configuration Settings for Voice Boards

This section provides a reference to channel settings that must be configured for the Ai-Logix LD integration. You should refer to this section whenever you add new channels to your Uptivity system.

Any other voice board changes should only be done under direct supervision from Uptivity Support. Done incorrectly, voice board modifications can have serious negative impact to your system. In addition, altering the hardware configuration of your system may void your warranty.

These settings apply when configuring channels for Ai-Logix DP integrations:

Setting	Definition	Value
Number of Channels	This will already be configured unless you are adding a new Ai-Logix card. When adding a new card, select the value from the drop-down list based on the trunk configuration: 23 – T1 ISDN for ISDN-signaled T1 trunks 24 – T1 RBS for T1 trunks with Robbed-bit 30 – E1 ISDN for ISDN-signaled E1 trunks 30 – E1 RBS for E1 trunks with Robbed-bit
Assign	Used in deployments where physical devices and channels have a one-to-one correspondence, or to allocate specific channels to specific types of recording. For details, search online help for channel assignment.	Dedicated Record (Device)
Assign Value	Type one PBX Trunk Member/Port ID per channel. This value is case sensitive.
Trunk Tap	Indicates whether to use the trunk-tap capability of the card.	Selected

<< Previous Section