Notification Settings

General Settings

Enable Audio Alerts
Select Yes or No from a drop-down list to specify whether Uptivity should sound audible alarms. If you select Yes, alarms will sound for any of the alert levels checked under Audible Alert Subscriptions. The default value is No.
Number of Days to Save Log Files
Specifies the number of days Uptivity will save files created by the Logger service. The default value is 14. This value is configured during installation and should not typically be extended unless you are directed to do so by Uptivity while they are actively troubleshooting an issue.
Enable Floodwall
Some conditions can generate an enormous number of alerts within a short period of time. When Enable Floodwall is set to Yes, email alerts are throttled to prevent overloading your mail server. The default value is Yes.
Floodwall - Number of Allowed Messages
This setting only applies if Enable Floodwall is set to Yes. Allows you to specify the number of email messages the server sends per interval. Any further messages of the same type will be blocked until the interval expires. The default value is 10.
Floodwall - Number of Minutes
This setting only applies if Enable Floodwall is set to Yes. Allows you to specify the length of the time interval for message blocking. The default value is 1.
Disk Space Notification Interval (minutes)
This setting applies only to email subscriptions for the Disk alert type. Allows you to specify the interval between low disk space email alerts.
Email Address
Type the email address for an individual or group who should receive email alerts. The address will receive emails for any of the alert levels checked under Subscriptions. You can only type one email address in the field; use the Add Email button to create additional subscriptions.
Enable SNMP Notifications
Select Yes or No from a drop-down list to specify whether Uptivity should send SNMP traps for use with third-party monitoring software. If you select Yes, traps are sent for any of the alert levels checked under Subscriptions. The default value is No.
SNMP Community
Type a value if your SNMP software requires it for communication with Uptivity.
SNMP Enterprise
Specifies an IANA-registered value that allows your SNMP monitoring software to identify Uptivity-generated events. The default value is 1.3.6.1.4.1.26393.
SNMP Gen Trap
Allows you to provide a generic type value that can be used in multiple server systems to distinguish whichUptivity server generated the SNMP trap.
SNMP Version
Uptivity can generate both SNMPv1 and SNMPv2 traps. Select the type supported by your SNMP management application from the drop-down list. The default value is SNMPv2.
SNMP Address
Allows you to specify the IP address of the SNMP server.
Test Alerts
Allows you to test alert configurations by sending emails to the most recently saved subscriptions.

Alert Levels (Subscriptions)

Uptivity supports 12 different levels of alerts. Levels designated as Primary are the most likely to indicate a serious problem with your system that impacts recording, multiple users, or both. inContact recommends email notifications for these types of errors, and your Uptivity installation team typically configures these.

Alert levels designated as Secondary typically do not require email notifications. In most cases, these messages are seen in conjunction with work you are already doing with Uptivity Support and your support engineer will help you take the appropriate actions.

For a more detailed consideration, see Logging Levels.

Debug
Provides the highest volume of events and the most detailed output for all modules; typically used only in troubleshooting scenarios. This is a Secondary level alert.
Info
Provides general system information. A tremendous number of events are generated at this level, and log sizes can quickly become very large. This is a Secondary level alert.
Notice
Provides general notifications regarding system events. A tremendous number of events are generated at this level, and log sizes can quickly become very large. This is a Secondary level alert.
Warning
Provides information about events that could be related to further or future errors; typically used only in troubleshooting scenarios. This is a Secondary level alert.
Error
Indicates a system error has occurred and a single operation or transaction has failed as a result. These errors can be caused in a wide variety of ways. This is a Primary level alert.
Critical
Indicates a service or system has stopped functioning completely due to an error. For example, a critical error would be generated if a network outage caused your recording server to lose its connection to your PBX. This is a Primary level alert.
Emergency
Indicates a service or system has stopped functioning completely due to a configuration or resource issue. For example, an emergency error would be generated if a service stopped functioning due to lack of available memory on the server. This is a Primary level alert.
Security
Indicates a security event, such as multiple password failures, has occurred. This error may also indicate an unauthorized person has tried to access the system. This is a Primary level alert.
Testing
Provides enhanced debugging and development information for troubleshooting. This is a Secondary level alert typically used by Uptivity Support.
License
Indicates there is a problem with the Uptivity license. License alerts can be caused by a number of different factors. The Data section of the notification provides more information regarding the nature of the error. This is a Primary level alert.
Archive
Provides all events and messages related to archiving. For example, if a user requests a recording that has been archived to DVD, users subscribed to this alert receive an email telling them which disk to insert into the server. Error alerts for Archiver are not included in this subscription, but are in the Error and Critical alert types. This is an email-only subscription and may not be applicable to all NICE Uptivity systems. This is a Secondary level alert.
Disk
Alerts subscribers when the amount of free space on a disk has dropped below the specified level. These notifications can be configured for any disk (local or mapped) to which Archiver has access. This is an email-only subscription and may not be applicable to all NICE Uptivity systems. This is a Secondary level alert.

Related Tasks